House skirting refers to the process of framing the interior of a house in order to protect the interior from elements, as well as for aesthetic reasons. Most interior framing work will involve the use of two kinds of substances, wood and steel. This is because wood needs to be protected from moisture in order to protect its internal workings; steel does not. This means that you can either frame the home with wood, or steel, depending on what works best for your particular construction. The latter is more expensive than the former. Discover How to Install Mobile Home Skirting When Your House Isnt Straight by reading this blog. When it comes to house skirting for mobile homes, the most traditional method of framing is with traditional wood skirting boards. These are known as tongue-and-groove skirting boards. They have a number of advantages over concrete siding, the first of which is their aesthetic appeal. They are usually less obtrusive than the concrete siding, and they do not detract from the visual appearance of the home's exterior. Find out about the house skirting on this website. However, in order to utilize this form of skirting board, you must have a flat ground that is good enough to support the weight of the entire structure of the skirting boards themselves. On flat ground, however, concrete siding works just as well, if not better. Another consideration is the amount of moisture that must be allowed to build up under the house skirting. In general, the more moisture that must accumulate under the surface of the skirting, the weaker the boards become. As a result, the house must be built up over a period of time, rather than all at once. If the weather is particularly extreme, however, it may be necessary to move the concrete siding back into place during a particularly severe weather event. If you choose to use wood skirting boards, then one of the options available to you is to make use of the additional structural strength provided by the double top plate. The double top plate option is certainly an attractive proposition because it provides a way to eliminate the weakness inherent in the wood design. With double top plate, the panels of wood are built up around the frames in a manner that actually adds quite a bit of additional structural strength to the overall structure. Double top plate can also be used in conjunction with the framing behind the skirting panels to provide additional framing around the exterior of the home. This can be especially helpful when you want to incorporate the addition of a porch or patio onto the rear of the house. Once you have the panels attached to the frame sections with double sided tape or some other method, you will need to add a bottom rail that fits directly over the skirting. One thing to keep in mind about constructing a bottom rail is to make sure that the height is appropriate for the panels that will be included in the construction. You should also make sure that the bottom rail is securely anchored to the bottom panels using nails of adequate strength. If you do not use the proper framing, the panels may lean and slide out of place. When you have the preliminary design plotted out, you can begin the process of adding the first skirting panels. Typically, the entire process will take about two days, even though the panels will be slightly larger than the previous ones. As with any other kind of construction project, the skirting and framing company should be consulted to ensure that the preliminary plan is followed to a T. You should also make sure that the moisture content is adequate to protect the wood from rotting while the skirting is being constructed. The added protective layer will allow the panels to remain in place and provide additional structural strength as well as moisture control. Get more clues on the topic by reading this blog: https://en.wikipedia.org/wiki/Home.
0 Comments
Leave a Reply. |
|